Blog · 21 October 2026

Can You Put Fly Screens on Windows With Burglar Bars?

Yes. A magnetic fly screen sits on the window frame over the burglar bars, so you keep your bars and still keep mosquitoes out. Magniscreen was designed for exactly this: South African windows with bars, handles and fittings in the way.

Here is how it works, what to measure, and the few cases where we need to know more before we make your screen.

How does a fly screen fit over burglar bars?

The screen's frame has an internal depth of 35 mm, so it stands off the window frame and clears burglar bars, handles and fittings, even with the window closed. A woolpile seal around the edge seals over the bars where they meet the frame.

The screen accommodates burglar bars up to 17 mm from the window frame.

The magnets slide along the screen's frame, so you can shift them to clear a bar or a handle, or to stop the woolpile seal sticking out at the side. They can also be unclipped and clipped into a new position. Tip: leave the magnet holder in the sun or in hot water for a while first, so it clips in more easily.

Where a window handle has to stick out through the screen, we add an extra woolpile opening for it.

Why do some fly screens not work with burglar bars?

Roller and blind-type screens and frameless magnetic screens are not easily compatible with burglar bars. A rigid screen with 35 mm of depth built into its frame sits over the bars instead, and its magnets can be moved to clear them.

Conventional sliding screens are another option people look at, but they need installation, cannot be moved to another window, and may damage aluminium or wooden window frames.

A Magniscreen needs no installation at all. It is made to measure for your window, delivered to you, and you put it on yourself. You can read more about how magnetic fly screens work.

Can I still open the window with bars and a screen on?

Yes. Pull one side of the screen away from the frame, open or close the window, then push the screen back and the magnets click it into place. A window screen weighs about 900 g, so it is a one-hand job.

Because of the 35 mm depth, the screen can also stay on when the window is closed.

To clean it, lift the whole screen off and hose it down, with a little detergent if needed. The mesh catches a lot of dust before it reaches your room, so being able to take it off and wash it, and to clean the window behind the bars, really matters.

Does it work on steel, aluminium, wooden and PVC frames?

Yes. Magnets hold to steel frames on their own. For aluminium, wooden and PVC frames we supply small pre-glued Chromadek steel plates, 20 x 70 mm and colour-matched to your frame, that go where the magnets sit. Nothing is screwed into the frame.

The magnets need about 20 mm of flat frame on every side, and hold securely on as little as 14 mm. If tiles or plaster cover part of the frame, we supply pre-glued L-plates: one leg is glued to the wall, tiles or frame, and the other extends the frame, giving the magnets a surface to hold on to.

See fly screens for aluminium windows and our guide on how to measure for the details.

Can you put a fly screen on a security gate?

Yes. A gate panel is made to fit your existing security gate and needs no installation. Enough magnets go on the panel to hold it firmly to the gate, and L-brackets at the top stop it falling off if the gate is slammed.

We can also leave an opening so you can reach the gate lock without taking the screen off. For a door you use all day, a gate panel like this is usually a better choice than a magnetic panel on the door itself, which has no hinges and has to come off each time you walk through.

More on fly screens for security gates.

What should I tell Magniscreen before I order?

Tell us if your burglar bars stand more than 17 mm off the window frame, if there is less than 14 mm of flat frame on more than one side, or if it is a louvre window. Each of these changes what we need to make.

  • Less than 14 mm of frame on more than one side: L-plates may be needed.
  • Louvre windows: need an extra extension fitted first, as they do for any make of screen.
  • Blinds: you need a gap of at least 38 mm between the window frame and the blinds.
  • Walls or tiles right next to the screen: measure at both ends, because walls are not always straight, and make the screen at least 5 mm smaller than the narrowest measurement.
  • A screen that fills the entire window reveal: where the screen is surrounded by walls, a grip handle is required to remove the screen and access the window. Please let us know when ordering if you need a grip handle. See the photo.

When you know your sizes, our price estimator shows what your screens would cost.

By Magniscreen, makers of magnetic insect screens in Centurion since 1998.

See your price in 2 minutes

Enter your window and door sizes and get an instant estimate from our current price list, shipment cost included. No obligation.

Get a price