Measuring guide
How to measure for fly screens
Each Magniscreen is made to the size you give us, so it is worth five minutes with a tape measure. You need a width and a height in millimetres for every window or door. Here is exactly what to measure.
- Measure in millimetres (mm)
- One width and one height per screen
- Not sure? Send what you have and ask us
Measuring windows, doors and security gates
You need one width and one height per screen, in millimetres: the completed screen size, which covers the window opening and its surrounding frame. The magnets need about 20 mm of flat frame on every side, and at least 14 mm.
Measure in millimetres (mm).
Open your window and check the space available for the screen. Measure the window opening, including the surrounding frame, in both width and height.

Window frame: 20 mm preferred, 14 mm minimum, on every side.
Accommodates burglar bars up to 17 mm from the window frame. Internal height: 35 mm to fit over window furniture.
Less than 14 mm of frame available on more than one side?
Please let Magniscreen know. L-plates may be needed.
Walls and tiles are not always perfectly straight, so the available space may differ between the top and bottom or left and right. If the screen will sit directly next to a wall or tiled surface, measure at both points and make the screen at least 5 mm smaller than the narrowest measurement.
Measuring sliding doors and sliding windows
Measure the height of your existing sliding panel, top to bottom, and the width you want the screen to cover. The screen panel fits into the existing top, bottom and side U-channels, so it must be the same height as the sliding panel.
Designed to fit into your existing U-channels
Magniscreen panels fit neatly into the existing top and bottom U-channels, as well as the U-channel on one side of your sliding door or window.
Measure the height (in mm)
Measure the existing sliding panel of your sliding door or window from top to bottom. The Magniscreen panel must be the same height to fit correctly into the channels.
Measure the required width (in mm)
The panel should cover the opening and provide good airflow, while still leaving enough space to enter and exit through a sliding door.
For detailed measuring and installation guidance.
What if I measure wrong?
Understanding that measuring might not be your daily task, we want to assure you that if any mistakes occur, we will adjust the screens free of charge. The only cost for you would be the shipment cost. T&Cs apply.
Unsure about a window? Mention it in your quote request, or call us, and we will help you measure it. We can also guide you on a WhatsApp video call while you measure.
Got your measurements?
Enter them and see your price estimate straight away, shipment cost included. You can save the estimate or ask for a formal quote.
Questions
Measuring questions
Can I use magnetic fly screens if I have blinds?
Yes, if there is room. The screen is 35 mm deep, so you need a gap of at least 38 mm between the window frame and the blinds.
What if tiles or plaster cover the window frame?
We supply pre-glued L-plates. The magnets need about 20 mm of flat frame on every side, and hold securely on as little as 14 mm. Where there is less, one leg of a Chromadek L-plate is glued to the wall, tiles or frame, and the other leg extends the frame, giving the magnets a stable surface to hold on to.
How do I remove the screen if it fills the entire window reveal?
Where the screen fills the entire window reveal and is surrounded by walls, a grip handle is required to remove the screen and access the window. Please let us know when ordering if you need a grip handle.